Volume: 1.0 qt. over stock
Dimensions: Click here for dimensions.
PML makes two different rear end covers for the GM 10½ differential: this one and a part number 6060, a straight fin cover.
This differential cover fits heavy duty trucks and vans such as Chevy and GMC 2500 and 3500.
Typical applications include the following. Be aware that for each model and year there may be more than one rear axle possible so please check before ordering. See also GM 14 bolt 9½ and AAM 14 bolt 11½.
¾ Ton Truck, 1973 to Current
1 Ton Truck, 1973 to Current
¾Ton Van, 1973 to Current:
Vehicle configurations vary. Please check dimensions, clearance and fitment carefully before ordering. There is a restocking fee for returns.
Vehicles with towing packages may have limited space for a larger differential cover. Also, the spare tire may be close to the cover. Some folks have increased the space by tying the spare tire back.
This 14 bolt 10 1/2-inch differential cover uses 12 of the 14 bolts. The bolt hole at the bottom was removed because the drain boss is best located there. At the top of the cover another bolt hole was removed. The flange is 3/8-inch thick and blanchard ground to be flat and smooth. We have sold many of these and have never had a problem with leaking. The flange is very strong and the 2 bolts left out are not missed.
Please check and order the correct mounting bolt thread diameter. These differentials were made with 3/8-inch (.375 inch) and 8mm (.315 inch) bolts. PML offers the cover in both versions: P/N 9369-1 is for 3/8-inch bolts and P/N 9369-2 is for 8mm bolts.
PML Differential Cover Compared to Stock
These images show this PML differential cover compared to the stock cover.
PML Differential Cover Features: